Case studies
Every project here was planned and overseen by our team, from digital templating to installation. Open one to see the challenge, the solution and the result.
Kitchen · Sintered Stone
Bellevue, WA
A Bellevue kitchen with Dekton Sirius countertops, mitered edges, a 6 inch backsplash and matching window sills. Under-cabinet LED lighting shows off the deep color.
Read case study
Kitchen · Granite
Everett, WA
An Everett kitchen with MSI Eclipse granite countertops, a polished eased edge and tight cutouts for the cooktop and sink. Seams are placed to stay out of sight.
Read case study
Kitchen · Sintered Stone
Seattle, WA
A contemporary Seattle kitchen with Dekton Domoos countertops, a high backsplash, a TopZero sink and Fenix cabinet doors.
Read case study
Kitchen · Quartzite
Burien, WA
A Burien kitchen island in Meta Black Marinace with a polished, eased edge and a TopZero undermount sink. The bold pattern runs across the island without a break.
Read case study
Kitchen · Sintered Stone
Kirkland, WA
A Kirkland kitchen that blends Lapitec countertops with porcelain on the cabinets and vent hood. A TopZero sink and mitered waterfall edges keep it sleek.
Read case study
Kitchen · Natural Stone
Seattle, WA
A modern kitchen in Seattle's Alki Beach with honed Statuaretto natural stone, eased polished edges and matched veining across several slabs.
Read case study
Kitchen · Sintered Stone
Hunts Point, WA
A Hunts Point kitchen in Neolith Calacatta Silk, with a full-height backsplash, a large island and mitered edges throughout.
Read case study
Kitchen · Quartzite
Gig Harbor, WA
A $13M Gig Harbor house project: a 24-foot, 1,000-pound natural quartzite countertop made from five Taj Mahal-type slabs and secured with seismic fasteners. Four undermount sinks and six faucet holes are built into the stone.
Read case study
Kitchen · Sintered Stone
Seattle, WA
A contemporary Seattle kitchen with Dekton Laos countertops, a Lapitec island with an induction cooktop and a stone-wrapped hood.
Read case study
Kitchen · Porcelain
Bellingham, WA
A Bellingham kitchen and bathroom vanities in XTONE Bottega Antracita and Porcelanosa Arctic White porcelain, installed in two stages.
Read case study
Kitchen · Sintered Stone
Seattle, WA
A diamond-shaped kitchen island in Dekton Laurent at the Seattle Design Center, with veining matched across every plane.
Read case study
Kitchen · Sintered Stone
Port Ludlow, WA
A Port Ludlow kitchen in Dekton Laurent and Dekton Rem, with full-height backsplashes, mitered waterfall details and a dining table on a hidden metal frame.
Read case studyAbout these projects
The kitchen projects here range from Bellevue and Hunts Point to Everett, Burien, Gig Harbor, Port Ludlow and Bellingham, with several in Seattle and one in Kirkland. Most use sintered stone, including Dekton Sirius, Laos, Laurent and Rem, Neolith Calacatta Silk and Lapitec. Others use MSI Eclipse granite, quartzite, honed Statuaretto natural stone and XTONE porcelain.
Some details come up again and again. Mitered and mitered waterfall edges keep the profiles clean, full height backsplashes in Hunts Point and Port Ludlow carry the countertop up the wall, and five of the kitchens use TopZero undermount sinks. One Seattle kitchen sets an induction cooktop into a Lapitec island, and the Port Ludlow kitchen adds a dining table on a hidden metal frame.
Each project starts with digital templating of the room as built and slab approval before anything is cut, so the seams land where they were planned: near the sink, along a cabinet line or out of sight. Open any project to see the challenge, the solution and the result.
Share photos, rough sizes and the material you like. We will help you take the next step.